Powersoft futureproofs Canadian Casino audio
Monday, 17 May 2021
casinoCaesars Windsor had its original audio system installed in 2008
Canada - Powersoft’s Ottocanali amplifier platforms have been chosen by Solotech as one of the cornerstones of the new audio system at Canadian casino and hotel resort, Caesars Windsor.
The venue – part of the Caesars Entertainment empire – had its original audio system installed in 2008, but with the supplier having sent an end-of-life notice in 2018 and Caesars Corporate changing its minimum standards, it had to act decisively.
“As well as the end-of-life notice, we soon realised that we couldn’t upgrade the Windows portion of the old system without upgrading the hardware to match,” said Brian Drouillard, manager audio visual at Caesars Windsor.
Drouillard had already been working with compatriot company Solotech on upgrading the audio systems in hotel ballrooms and meeting rooms, and so spoke with its on-site technicians first to determine if they had any recommendations for alternate systems.
“We did a cost/functionality analysis to determine what would be best for us, then contacted Solotech as soon as we were ready,” said Drouillard. “Solotech has been a wonderful working partner already, having completed a number of jobs for us in the past, both on time and on budget, with the design and functionality demanded of a world class venue.”
Drouillard was then tasked with providing senior systems designer / Q-SYS software programmer for Solotech, Peter Lima, with all of the functionality requirements, as well as all of the documentation on the old system and any changes made throughout the years.
“My first job was to confirm the interoperability and functionality of the amplifiers in relation to the Q-SYS ecosystem,” said Lima. “I knew about Powersoft’s Ottocanali amplifier platforms after seeing them at Infocomm and ISE but I’d never had chance to get my hands on one. Through our distributor, we requested a demo amplifier, so that we could model and test the feature set and AES67 interoperability between Q-SYS and Powersoft.”
Lima needed to set up the Ottocanali amplifiers to receive the AES67 audio streams, and to fully test the Powersoft Q-SYS plug-ins.
“The challenge was to have the network QoS (Quality of Service) settings to provide reliability of the Audio-over-IP,” he said. “To overcome these challenges, Solotech set up all the amplifiers and network switches in the shop for a full ‘burn in’ period and monitored the audio streams to see if they would be affected by different end point devices. We also tested the functionality of the amplifiers’ analogue inputs to the Q-SYS cores, as this was a requirement from the site.”
The main DSP was the QSC Q-SYS system, which was configured and connected through the existing network switches throughout the property to feed groups of amplifiers in five remote locations. Background music supplier, Cloud Cover, also supplied 10 of its Android-based boxes to provide custom music around the property.
“From a design aspect, obviously the ability to be network connected is an upgrade in terms of us providing flexibility for growth and design adjustment if required,” commented Drouillard. “From a user standpoint, the physical size of the amplifiers allowed to remove two thirds of the racks that were used in the old system, and the front displays indicating dB level for each channel is a wonderful tool for trouble shooting and the diagnostic / configuring access.”
Solotech monitored the network for AES67 stream stability during a ‘burn in’ period, and the amplifiers performed flawlessly during this time.
“I think this system is now completely futureproof,” said Drouillard. “If they add a restaurant, for example, we can easily install an amplifier, connect it to the network and incorporate it into the system as if it had always been there.”

Latest Issue. . .

Tweets from our Friends