Work Pro extends Arion line array range
Tuesday, 25 February 2020
workproarion5frontpersArion 5A - ‘a fully redesigned compact size line array system’
Spain - Equipson announced at ISE a new and expanded Work Pro Arion line array range.
The Work Pro Arion Series is a DSP-powered Line Array ecosystem that already includes the popular Arion 21A system and double 10” format SL210A satellites. This system can be configured to suit a wide variety of applications, from medium to large venues where power, quality, and controlled directivity are required through to theatres and concert halls.
At ISE, Equipson also launched the Arion 10A and the Arion 5A, which are ‘significant redesigns’ of previous products.
Arion 10A is a single 10" version of the Arion 21A that incorporates Work Pro’s internal DSP technology and high-quality amplifiers from Danish brand Pascal. In keeping with the Arion 21A, the new Arion 10A uses top of the range transducers that were designed and manufactured in Europe. Its amplifier and DSP technology is concentrated in one box, which in turn supplies the powered audio signal to the following box. This means that only one dual channel amplifier is need for every two boxes. At the low frequency end of the spectrum, Arion 10A uses an affordable SL218A subwoofer.
Equipson’s second new product in the series is the Arion 5A - a fully redesigned compact size line array system that offers an impressive power ratio of 1600W peak through its sub and 2400W peak through its tops.
Arion 5A tops consist of two 5" woofers, one 1.75" voice coil, a 2.2" ring radiator and a 15" sub that can be combined with 4, 6 (1 sub) and 8 or 12 (2 subs) top boxes. The sub used for this system is an SL115AS, which comes with a dual amp high power 2000W Pascal amplifier. When combined with Work Pro’s internal networked DSP, the amplifier can supply a powered audio signal to the entire system and can be fully managed by Ethernet.
(Jim Evans)

Latest Issue. . .

Tweets from our Friends