EAW unveils compact SM12 stage monitor
- Details
SM12 is a two-way passive loudspeaker that can be used as a stage monitor or fill speaker. A concentric driver attached to a CSA wave guide provides even coverage throughout the 90° x 60° pattern. A large ground coupled port extends low frequency response down to 60Hz from the 12” woofer mounted in the low-profile wooden enclosure.
When utilising the available mounting pattern, SM12 can be used on a flat surface with two cabinet orientations or mounted on a third-party pole. An integrated kickstand offers additional positioning options when used as a stage or floor monitor.
"Stage space is at a premium and artists have high expectations,” says TJ Smith, president, EAW. “SM12’s compact and rugged form factor provides exceptional output and coverage over a large area from a small space using a single amplifier channel. It's designed to be deployed in multiple orientations and wiring configurations, making it a flexible addition to your inventory.”
SM12 is designed to be used on a variety of stages, whenever high output and low-profile reinforcement utilising a single amp channel is required. Additionally, SM12 offers the durability and reliability expected for live events. Large rubber feet keep the loudspeaker from moving due to vibration, while a heavy-duty grille is capable withstanding typical on-stage use.
The monitor also offers multiple input options, allowing for easy cable concealment and fewer cable runs. It seamlessly integrates with EAW's UXA4403 amplifier. Further product features and benefits of SM12 include two input connectors that are concealed in the low frequency port allowing for tamper-proof and discrete wiring. An input selection switch hidden in the low frequency port selects the first or second set of NL4 pins as the crossover input reducing the number of speaker wires on stage.
In addition, a large ground coupled port increases low frequency impact from a relatively small enclosure with no chuffing artifacts while a second set of input connectors are located on the bottom of the loudspeaker to accommodate clean wiring when used in the fill orientation, wall mounted or on a pole.
